QWhy use an SMT nut?
It brings fastening into the SMT line and reduces secondary assembly, while pad and load validation remain essential.
Automated SMT Fastening
SMT Nuts & Standoffs
SMT NUTS & STANDOFFS
Reflow-compatible PCB fasteners selected by thread or hole, outside diameter, height, material, finish and tape-and-reel format.
This page describes a product family and selection inputs. Confirm current rating, temperature rise, tolerances, certification scope and lead time against the selected part, drawing and valid records. Illustrations are not product or factory evidence. Cu-Al figures come from supplied material documents and apply only to their samples and conditions, not a blanket certification or system cost guarantee.
Drawing & ToleranceConfirm for the selected part
Electrical & ThermalValidate the actual assembly
SMT & PackagingConfirm feeding and reflow
Evidence & AcceptanceCheck sample, lot and scope
TECHNICAL SPECIFICATIONS
Parameters & Engineering Standards
Standardized replacement models and customized dimensions tailored to your PCB footprint and thermal budget.
| Engineering Dimension | Specification & Standard |
|---|---|
| Product forms | SMT nuts, threaded standoffs and through-hole spacers |
| Hole types | Metric threads, clearance holes and custom interfaces |
| Materials | Brass, copper and stainless steel |
| Packaging | Bulk or EIA-compatible tape-and-reel |
| RFQ inputs | Hole/thread, OD, height, finish, pad and packaging |
ENGINEERING & DFM
End-to-End Support from DFM to Automated Mass Production
01
Pick-and-place surface and reel orientation
02
Reflow compatibility and land-pattern input
03
Torque, attachment and mechanical-load review
04
Metric, inch and custom-height assessment
APPLICATIONS
Application and Selection Context
CASE 01
Automotive electronics
BMS, ECU, ADAS and control modules
CASE 02
Industrial control
Controllers, sensors and power boards
CASE 03
Communications
Automated PCB assembly and structural fastening
FAQ
Engineering & Selection FAQ
QAre custom heights possible?
Board height, OD, thread and packaging can be reviewed for manufacturability.
Have a part number, drawing or sample?
Share critical dimensions, target current, assembly conditions and volume to agree the DFM review scope and project schedule.